24-Hour Hour Hotline

400-0757-608 

National joint insurance

  No worries after sales

文章
  • 文章
Search

EN

/

Home >> news >>Company news >> Installation method and steps of integrated water heater
Details

Installation method and steps of integrated water heater

Installation method and steps of integrated water heater:

The integrated water heater must be installed by a qualified electrician or professional installation technician. Before installation, please carefully check whether the power meter, power cord path, fuse, and the circuit leading to the integrated water heater are equipped with power switches. Ensure that the above devices can meet the needs of the rated current and voltage of the water heater. When the power cord is not long enough or damaged, ask a professional electrician to replace the power cord that meets the requirements. Do not connect the power cord that does not meet the requirements. Make sure the water heater must be installed vertically.

16.jpg

In order to facilitate the cleaning of the water inlet filter, this integrated water heater uses a removable movable filter. When installing the water inlet pipe, please do not forget to install the filter to prevent the water pipe from clogging the internal pipe of the heat exchanger. After installation, check whether the power cord insulation is intact before powering on the test machine.

Precautions for integrated water heater installation:

1. The shower screen must be safely and reliably grounded. It is strictly forbidden to remove the grounding device for any reason.

2. For the first use or long-term shutdown, the water should be passed before the electricity.

3. When the inside of the shower screen is likely to freeze, please remove the inlet and outlet pipes, and drain the internal storage to prevent the inside of the shower screen from freezing; if the inside of the shower screen is frozen, the water must be tested after the ice has been confirmed and there is no damage before it can be powered on. .

4. When the shower screen is not smooth or clogged, the power should be cut off, and the water inlet filter and water hole should be cleaned.

5. When the power cord is not long enough or damaged, ask a professional electrician to replace the power cord that meets the requirements. It is forbidden to connect the power cord that meets the requirements.

6. For safety reasons, when installing and using the power switch of the shower screen, avoid spraying water directly on the power switch.

7. After the installation is completed, please check whether the power cord is intact and then power on the test machine.

8. In order to prolong the life of the shower screen, please turn off the power and then turn off the water switch after each use. When the time is not used, please turn off the external main power switch.

9. Please wipe off the water on your hands before turning the power on and off.

The article is provided by: Integrated Water Heater http://en.chigolyp.com/   Zhigao Integrated Water Heater, this article does not represent the views of this site


Please fill in the intended agency area
More
Your name:
Contact number: *
Intentional region:

It's better to seize the opportunity and do business with big brands

The winter of others is the best time for you to sow

National investment Hotline

400-0757-608

Unlimited business opportunities

Technical Support: 自定易网络 | Admin Login